Skip to content
  • There are no suggestions because the search field is empty.

How many splines does a 1000 RPM PTO shaft have?

A 1000 RPM PTO output shaft has either 21 splines (1 3/8 inch diameter) or 20 splines (1 3/4 inch diameter). The spline count depends on the shaft's diameter. On an older tractor like a 1998 John Deere 7810, the quickest way to know which one you have is to measure the shaft or count its splines.

The standard PTO shaft sizes

Tractor PTO shafts turn at standard speeds so they can work with a wide range of implements. These are the common output shafts:

  • 540 RPM: 1 3/8 inch diameter, 6 splines
  • 1000 RPM: 1 3/8 inch diameter, 21 splines
  • 1000 RPM: 1 3/4 inch diameter, 20 splines

Some equipment also runs at 1300 RPM, but 540 and 1000 are the speeds most Customers deal with.

How to check which shaft your tractor has

We can't confirm from this article which 1000 RPM shaft a particular 7810 came with, so check the tractor itself:

  1. Shut the tractor off, set the parking brake, and remove the key before you get near the PTO.
  2. Measure the shaft diameter. A 1 3/4 inch shaft is the 20-spline 1000 RPM version.
  3. If it measures 1 3/8 inch, count the splines. Six wide splines means 540 RPM. Twenty-one fine splines means 1000 RPM.
  4. Check your operator's manual to confirm the PTO speed and shaft your tractor was built with.

Why the match matters

Your implement's driveline has to match the tractor's PTO in both speed and spline. A driveline that fits the shaft but runs at the wrong speed is not a safe fit. If you're unsure, don't force it. Confirm the shaft first.

If you're buying a replacement shaft or driveline part, give our parts team your tractor model and serial number along with your measurements. They'll confirm the correct part for your machine. You can browse John Deere PTO shafts and tractor PTO parts to see what's available, or contact one of our stores across Indiana and Ohio for help matching a part.